10% off your order through Nov 8. Use code EARLYBLACKFRIDAY at checkout.10% off. Code EARLYBLACKFRIDAYLast day: 10% off your order ends tonight. Use code EARLYBLACKFRIDAY at checkout.Last day. Code EARLYBLACKFRIDAY10% off your order through Nov 13. Use code SALUTE10 at checkout.10% off. Code SALUTE10Last day: 10% off your order ends tonight. Use code SALUTE10 at checkout.Last day. Code SALUTE10
Free shipping · 30-day returns · Guaranteed fit
Cover experts live · 1-800-385-3603
My orders (opens in a new tab)
CarCovers.comAn AllGuard Company
Expert Fit Finder
Step 1 / 5
Your garage is empty. A locked fit saves here.
Awaiting vehicle type. Patterns for 100+ makes on file.

Articles Why Car Covers?

Does a Car Cover Fit Over a Rear Spoiler? What You Need to Know

★ Platinum · every element

Most car owners asking this are staring at a spoiler and a cover box, unsure if they'll end up forcing fabric over plastic. Short answer: yes. A car cover fits over a rear spoiler in the vast majority of cases, especially when the cover is custom-fit to your exact make and model. Universal covers can work too, but they need enough slack built into the rear panel to clear the spoiler without stretching or rubbing.

Does a car cover fit over a rear spoiler?

Yes. Most car covers, whether custom-fit or well-made universal options, are designed to accommodate a factory-installed or moderately sized rear spoiler without a problem. Custom-fit covers are patterned around your vehicle's actual body lines, spoiler included, so they drape naturally instead of pulling tight.

Universal covers are the ones to watch. They rely on general sizing and elastic hems to account for a whole range of vehicle shapes, which means a taller aftermarket wing can stretch the fabric, bunch it up awkwardly near the trunk, or create a pressure point that rubs every time wind moves the cover. If your spoiler is stock-height, you're probably fine either way. If it's not, the type of cover you choose starts to matter a lot more.

What's the difference between a custom-fit and universal cover for spoiler clearance?

Satin · indoor (garage)

Custom-fit covers are cut from a pattern specific to your vehicle, factory spoiler height and shape included. The manufacturer already knows where the spoiler sits, how tall it is, and how the rear glass slopes toward it, so the panel is shaped to clear it from the start. No guesswork, no stretching.

Universal and semi-custom covers work differently. They're built to fit a size range, say "mid-size sedan" or "compact SUV," using elastic hems and adjustable straps to take up the slack. That approach works fine for a smooth trunk lid. It gets trickier when there's a wing or spoiler in the way, because the elastic can only pull the fabric so far before it's taut against the highest point on the car. A sedan with no spoiler and a hatchback with a factory wing need two very different rear panel shapes, and a one-size-fits-many cover can't always account for both.

If you're trying to decide which route makes sense for your car, the custom-fit car covers guide breaks down when the extra precision is worth it versus when a universal cover gets the job done.

Will a tall or aftermarket spoiler cause fitment issues?

★ Macro · water beading

This is where things get real. A stock spoiler rarely causes trouble. A tall GT-style wing, a roof-mounted spoiler, or anything aftermarket and oversized is a different story.

Taller spoilers can tent the fabric around the highest point, leaving a stretched, drum-tight patch instead of a smooth drape. Worse, if that high point becomes a constant contact spot, wind and movement will rub the same patch of fabric over and over. Do that for a few months and you've got a thin spot or a hole right where the spoiler meets the cover. Nobody wants to discover that the first time it rains.

Before buying, check your spoiler's actual height and width against the product specs or size chart for the cover you're considering. It only takes a minute, and it's a lot cheaper than returning a cover that tents over your wing. Some owners with particularly tall or sharp-edged spoilers add a soft cloth or felt patch right at the contact point, just to cut down on friction over time. Not a bad habit if your spoiler is on the aggressive side.

How do I know if my car cover is sized correctly for my vehicle's spoiler?

Measure first. Get the height and width of your spoiler and compare those numbers against the cover's listed dimensions or the vehicle-specific fit chart. This sounds obvious, but it's the step most people skip, and it's the one that actually answers the "does a car cover fit over a rear spoiler" question for your specific car instead of in general.

Look for covers that mention reinforced or elasticized rear sections built with factory spoiler clearance in mind. That phrasing in a product description isn't filler, it tells you the manufacturer actually tested against a spoiler shape rather than assuming a flat trunk.

Here's a useful diagnostic: if the cover fits loosely everywhere else but pulls tight right at the spoiler, that's almost always a sizing problem, not a cover-type problem. Swap it for the correct size before you assume the whole style is wrong for your car. For exact measuring steps, the sizing guide for car covers walks through where to measure and how to read the size chart correctly.

How do I install a car cover over a spoiler without damaging it?

Cover care · detail

Installation technique matters almost as much as sizing. Drape the cover front to back, letting the fabric settle around the spoiler naturally instead of yanking it taut over the top. Pulling the cover tight over a spoiler edge is exactly how you create the friction point that wears through fabric.

Use whatever grommets, straps, or built-in patches came with the cover to secure it, rather than forcing the material past the spoiler's edge to get a tighter fit. If your cover has an opening for an antenna, use it as intended instead of stretching fabric around an obstacle it wasn't designed for. Small antenna patch accessories exist for exactly this kind of fit tweak, and they're worth a look if your setup has multiple protrusions to work around.

When it's time to take the cover off, resist the urge to grab the back and yank. Pulling from the rear drags the fabric directly across the spoiler's edge, which is the fastest way to wear a hole in an otherwise good cover. Walk it off gradually, the same way you put it on. For a full walkthrough, see the simple guide to installing your car cover or the quicker one-minute installation method if you're short on time.

Find the right cover for your vehicle

So, does a car cover fit over a rear spoiler on your specific car? Probably, but "probably" isn't good enough when you're trying to avoid a return or a cover that wears through in one season. Check the spoiler height, check the product's fit notes, and pick based on your actual body style rather than a generic size label.

If you'd rather skip the guesswork, use the coverfinder tool to match a cover to your make, model, and body style, or browse the full car covers lineup to compare options directly. And if you're not ready to buy yet, it's worth bookmarking this one or subscribing for more fit and care guides before your next storage season sneaks up on you.

Weather guide

Where do you park it?

Where a car sleeps decides what wears it down. Tap your spot and we'll name the cover we'd pick, and why.

Every answer links to its condition page for the full reasons.

Our pick for full sun

AllGuard Weatherproof Max

We match it to cars that bake outside: its UV treatment coating helps the fabric hold up through a summer parked out. Read why

  • Water-resistant, UV-treated outer with a microporous film
  • Soft fleece liner against the paint
  • Elastic front and rear hems

From $169.99car sizes; trucks and SUVs vary

Shop Weatherproof Max
  • If we don’t get it right, we’ll make it right.
  • AllGuard™ Protection Warranty included
  • Free shipping to the contiguous U.S.
  • 30-day returns

Also consider Platinum Shield, from $199.99for snow, storms and damp

Made for yours

Tell us what you drive. We’ll show the covers made for it.

Every cover is made for a year, make and model, so the finder is the fastest way to the right one.

  • Our Fitment Team reviews and measures every make and model.
  • Wrong cover? Return shipping is on us, and we send the right one.
  • AllGuard™ Protection Warranty included with every cover.
Vehicle type

Pick one to start. Year, make and model come next.

Find my fit
Classic, custom body or not listed?Ask the Fitment Team